The different stages of this process are as follows:

Alkaline dry cleaning of the part
The aim of dry cleaning is to eliminate greases
The dry cleaning is effective on all the greases (animal, vegetable and mineral greases)

Phosphatating of the parts
The aim of phosphatating is to put a crystalline coating on the metal
The type of phosphatate used is an Iron phosphatate

Electrodeposition
The paint which is electrodeposited on the part is of the type grey POWERCRON
The thickness of the paint varies according to the metal nature, from 15 up to 25 microns
The paint is free of lead, cadmium, mercury, chromium

Gloss paint
It is possible to put a coloured gloss paint on parts : yellow, red, grey…
The thickness « e-coat + gloss paint » is 50 microns minimum.

SIZES OF TREATED PARTS

The surface treatment is made by sprinkling.
The electrodeposition is made by immersion. The adherence to salt spray is 400 hours.
The parts to treat are hung on a chain with holders. The dimensions of hung parts must respect the following sizes (maximum weight : 200 kg):
height 1 800 mm
width 600 mm
length 1800 mm